Sale
  • Philips Heartstart XL Defibrillator
PHILIPS

Philips Heartstart XL Defibrillator

Philips HeartStart XL Desfibrilador

Condición REFURBISEHD

Product Specifications

Physical

 

Defibrillator Model HeartStart XL (M4735A )

Dimensions

19.0 cm (H) x 37.6 cm (W) x 34.6 cm (L)

(7.5 in. x 14.8 in. x 13.7 in.)

 

Weight

Weight: 6.0 kg (13.3 lbs.) including battery and full roll of paper.

 

Environmental and physical requirements 

 

Temperature

0º C to 55ºC operating; -20º to 70ºC storage.

Charging the battery at temperatures above 35ºC may degrade battery life.

Storing the battery for extended periods at temperatures above 40ºC will reduce battery capacity and degrade battery life.

 

Humidity

Up to 95% Relative Humidity

 

Altitude

Operating: up to 15,000 ft.

Storage: up to 15,000 ft.

 

Shock

Philips Medical Systems, Section 760 Class B1 Drop Test

(200 G’s <3 msec pulse).

Vibration

Philips Medical Systems, Section 759 Class B1 Vibration.

 

Water Resistance

Meets IEC 60601-2-4, IPX 0.

 

EMC

Meets EN 60601-1-2

Safety

Meets IEC 60601-1 (EN 60601-1), UL 2601-1, CAN/CSA C22.2 No. 601-1.

 

Mode of Operation

Continuous.

AC Line Powered

100-240 VAC, 50/60 Hz, 1.5A (Class 1)

Battery Powered

12 V rechargeable, SLA

 

Display 

 

Type

LCD - TFT Color Liquid Crystal Display

 

Size

111.4 mm x 83.5 mm.

Resolution

320 x 240 pixels

Sweep Speed

29 mm/s nominal (stationary trace; sweeping erase bar).

Viewing Time

4 seconds

 

 

Battery 

 

 

Type

2 Ah, 12V, rechargeable, Sealed Lead Acid

 

Dimensions

2.4 in. (H) x 0.94 in. (W) x 7.2 in. (D) (61.7 mm x 23.9 mm x 182 mm).

 

Weight

1.4 lbs. (0.65 kg)

 

Charge Time

Approximately 14.5 hours to 100%. Approximately 3 hours to 90%, indicated by LED on front panel.

Capacity

100 minutes ECG monitoring or 50 full-energy discharges or 75 minutes ECG monitoring while pacing (with a new, fully charged battery at room temperature, 25º C).

Battery Indicators

LOW BATTERY message appears on display when at least 10 minutes of monitoring time and 5 maximum energy discharges remain (with a new battery at room temperature, 25º C).

Battery Storage

Should not be stored above 40ºC for extended periods of time.

Charger Output

Unit can be operated using only AC Power, with no battery installed.

 

Defibrillator

 

Waveform

 

Waveform: Biphasic Truncated Exponential. Waveform parameters adjusted as a function of patient impedance.

 

Shock Delivery

Via multifunction defib electrode pads or paddles.

Charge Time

 

Less than 3 seconds to 200 Joules with a new, fully charged M3516A SLA battery pack at 25ºC. Less than 15 seconds to 200 Joules when powered by AC with no battery installed.

 

Patient Impedance

Range

 

Minimum: 15 Ohm (internal defibrillation); 25 Ohm (external defibrillation)

 

Maximum: 180 Ohm

 

SpO2 pulse oximetry 

 

Wavelength Range

500 to 1000 nm.

 

Resolution

1%

 

 

ECG Monitoring 

 

 

Inputs

Single channel ECG may be viewed on display and printed. Pads ECG is obtained through 2 multifunction defibrillation electrode pads. Lead I, II, or III is obtained through the 3-lead ECG cable and separate monitoring electrodes. With a 5-lead cable, lead aVR, aVL, aVF, and any one of the V (1-6) leads can also be obtained.

 

Lead Fault

LEADS OFF message and dashed line appear on the display if an electrode or lead wire becomes disconnected.

 

Paddle Fault

NO PADDLES CONNECTED message and dashed line appear on the display if paddles become disconnected.

 

Pad Fault

PADS OFF message and dashed line appear on the display if the pads become disconnected.

Heart Rate Display

Digital readout on display from 15 to 300 bpm, with an accuracy of ±10%.

Heart Rate Alarms

Configurable pairs of low and high heart rate alarm limits: 30 to 100, 60 to 140, 90 to 160 and 120 to 200 bpm.

ECG Size

2.5, 5, 10, 20, 40 mm/mV

 

  • $ 3,750.00

Contact Us for more information and details