ASTRO
MED MT 95000 RECORDER with OPTIONS
Chart Recorder Laser Printer Resolution
SERIAL: ID544
- OPTIONS: AD400, AD451, DC400, DC950.
- This equipment has C950R SN: 92B0042
DESCRIPTIONS:
Chart Recorder Laser Printer Resolution - 300 dpi DC to
20 kHz Frequency Response 8, 12, or 16 Channels Completely
Programmable Data Capture - 2 Million Sample Memory Easy to
Use Simple Menu Driven Operation With the MT95000 only a few
keystrokes are needed to select chart speeds, operating modes,
sample rates, chart formats and most other functions. The
menus , arranged in a straight-forward manner, guide the user
through a full setup. Three complete setups can be stored
in non-volatile memory and recalled with a single keystroke
Host Control and Programmability The MT-95000 can be completely
programmed and operated via host control. Both RS-232 and
GPIB (IEEE-488) are standard. Improved Chart Viewing Built-in
LED display and Chart Illumination Located directly above
the waveforms, a continuous array of bright LEDs displays
the waveform action, even with the chart stopped. Also, a
row of internal lights illuminate the chart as it exits the
recorder, allowing charts to be monitored in darkened environments
Flexible Chart Layout Create the Chart you need - Quickly
and Easily Channel order can be changed with a few keystrokes
from the front panel. You can record your data on separate
or overlapping channels in a variety of formats, changing
formats with just a touch. Channels can be numerically identified
with a single keystroke Digital Data Interface DI488-950 Handles
data transfer rates of up to 400 Hz per channel. Both data
and commands are received via the GPIB port, standard on all
MT-95000's. Featuring 11-bit data transfer, synchronized chart
drive control and six valid chart formats, the DI-488-950
is ideal for low speed digital data recording. DI-16/950 was
designed for applications requiring high speed (up to 500
Hz) digital data transfer. Data is transferred in one 16-bit
word, which carries 11 bits of data plus command codes at
the speed of the host computer (up to 500 Hz). Chart drive
and data presentation commands are accepted from GPIB, RS-232
or the front panel. Data Capture and Playback Powerful Data
Acquisition Parameter Selection Select from nine different
sample rates ranging from 1 kHz to 200 kHz. Each analog board
supports four channels and can capture data in two ways -
all four channels may be sampled and 128 kSamples stored per
channel or only one channel per board may be sampled for 512
kSamples per acquisition. Sample size can vary from 4 kSamples
to 128 kSamples. Background Capture The MT-95000 can capture
data "in the background" permitting uninterrupted
real-time recording. There is no need to stop the chart until
the initiation of data playback. Playback Modes Captured data
can be played back in any real-time format - separate channels,
overlapped channels or data logging mode - plus X-Y plot mode.
Playbacks are labeled with time and date of capture, sample
rate, playback time scale, effective chart speed, trigger
channel and location. Any percentage of the captured data
can be replayed - in any mode..
The following message is required on all Healthcare listings:
"The sale of this item may be subject to regulation by
the U.S. Food and Drug Administration and state and local
regulatory agencies. If so, do not bid on this item unless
you are an authorized purchaser. If the item is subject to
FDA regulation, I will verify your status as an authorized
purchaser of this item before shipping of the item."
WE SHIP WORLDWIDE!!
Total Weight 140 pounds
Please, contact us to calculate the
shipping cost.
Sale by inCAV Technologies
490 Howard St
San Jose, CA
Reseller
|
